Bicycle lights for Your Choice

Primarily, this is rechargeable bicycle lights system. They are needed only for long night races, as they have capacious battery, and the luminous flux of very high power. True, the price of wholesale bike lights is much higher than the rest. But for the quality you have to pay. In addition, they produce mainly well-known brands who consider it beneath their dignity to produce cheap products. Dynamo generator - the problem with the batteries, and get rid of fuss with batteries. In this case, the lamp is powered by the movement of the bicycle. Complex in this system is nothing, but the cost may have multiple stun. In addition, the most advanced systems can store energy and, continuing to shine even when you are standing. This is especially convenient for city driving. There are also lanterns, built-in bicycle helmets. Also quite a handy thing, but do not consider them as a panacea. Establish normal lighting (e.g. a 300 lumen headlamp) on your vehicle will still have. This method only affects your comfort while traveling.

Actually, the second is part of the story. Prices today are quite biting, and it is not always possible to be sure of the quality of the item purchased. Because the aid of their own hands. The design of these devices is simple enough, but because the spread of this method has been considerable. The figure here is an LED flashlight for bike - the perfect solution to the problem. The brightness in the resulting device is quite high, and this is what plays the biggest role. In addition, it allows you to save a little.

Flashlight for a bicycle with one’s own hands to do simple enough, but it will need to buy a few things. Most can be found in markets with parts - you just need a good search rack with bicycle parts. Or, today it is possible to order online everything. First of all you need do LEDs and optical lenses. It is also necessary to find the body of the future flashlight, radiator, aluminum corner, adhesive, and the tumbler. Still need a Lexan plastic with MR10 marking. Naturally, the need for more and batteries. It is better to buy separately, without trying to do it yourself.

That's got to the question of how to make a lantern for a bicycle. If you use a ready-made housing, some things you do not need. So here are some few simplified schemes. Firstly, you need to install the hexagonal tubes for LEDs inside the body - this can be problematic because of the size. Be ready to cut them until they snap into place. Next, you should use the LEDs themselves. Connecting with each other they need to in order - plus-minus. After a hot melt glue them. An important point is cooling. For this you need an aluminum radiator.

Apply the strip on the upper part of the body, as well as to the rear, where the diodes are mounted. Next, it is necessary to fix the lens. You cannot use this for normal superglue - it will damage the inner surface. Conduct wiring fairly easy - use ordinary copper wire. Connect from plus to minus, etc., after which the wire into the hole on the rear wall of the housing. There battery will be placed, supplying energy. The next step - mount for a flashlight on a bicycle. You need a bracket size vehicle. Well, or another tube on which the lamp is mounted. The most important thing here - safe glue, epoxy best. He ensures that the lamp does not fall into the worst possible time, leaving you in the dark. The last stage - to connect a toggle switch to turn on the lamp, it is also easy.

Just put it in an electrical circuit between the battery and flashlight. This way you can turn on and off the device when it is needed. Naturally, removable battery will be better - so just charge them more convenient.